Description

RC10-W data access server is designed for commercial and technical multi-tariff metering of energy resources, collection, processing, storage, display and transmission of received information and allows the collection of electrical energy and power metering data from metering devices and further transmission to a higher level. Synchronization of metering devices is carried out over the built-in GPS receiver, or using time synchronization protocols from the upper level. Built-in WEB interface allows you to work without additional service software.

Features

Ethernet interface
Ports: up to 32
Connection interface: RJ-45, LC, SFP
Transmission speed: up to 1000 Mbit/s
Communication protocols: IEC 60870-5-104, IEC 61850
Network protocols and functions: IPv4, IPv6, TCP, UDP
Network redundancy protocols: RSTP, PRP/HSR
Clock synchronization protocols: NTPv3, SNTP, PTPv2

Serial interfaces
Ports: up to 32
Interface variants: RS-232, RS-422, RS-485
Connection interface: Terminal block (RS-232, RS-422, RS-485), DB9 (RS-232)
Transmission speed: up to 115 200
Communication protocols: IEC 60870-5-101, Modbus RTU

Power supply specifications

Power supply variants
Power supply variants: 2 inputs 12/24 V (DC); 1 (2) input 110/220 V (AC/DC)
Current consumption: up to 400 mA
Power supply range: 24 V 10 ÷ 30 V
Power supply range: 220 V 90 ÷ 265 V (AC), 100 ÷ 365 V (DC)
Power supply frequency range: (220 V) 45 ÷ 55 Hz

Design specifications
Mounting type: DIN rail 35 mm
Case: IP20 plastic
Weight, kg, max: 2
Dimensions (width x height x depth): 22.5 x 99 x 114.5 mm (basic modification)

Reliability performance
Mean time between failures, h: 140,000 hours
Average lifetime: 30 years

Operating environment
Ambient air temperature: –40 to +70 °C
Average humidity (non-condensing): 5 ÷ 95 % at 30 °C
Air pressure: 60 ÷ 106.7 kPa

Additional functions
Modem: 3G or 4G
SIM cards: 2
SIM card format: mini-SIM, SIM-chip (optional)
Communication standards: CSD, GPRS, EDGE, UMTS, HSDPA, HSUPA, HSPA+, DC-HSPA+, LTE
Antenna: 1 or 2 (MIMO support)
Antenna jack: SMA

Time signal receiver (GPS)
Tracking channels: 33
Acquisition channels: 99
Antenna jack: SMA

Universal channels for discrete input/output
Channel operation modes: discrete input (wet or dry contact), signal relay
Channel current consumption: 3 mA
Built-in power supply voltage: 12 V
Built-in power supply max current: 200 mA

Description

The RC7-W measuring transducer is designed for remote control and emergency recording. It is used as part of systems for collecting and transmitting data from transformer substations, distribution sites, electrical stations, as well as in systems for commercial and technical electricity metering, and for power quality indicator control and monitoring. The transducer also includes a function for determining persistent asymmetric line-to-ground faults by means of calculating the zero sequence current of higher-order harmonics.

Features

Telemetering channels
Number of current metering channels: 4
Rated value of metered current (Ia, Ib, Ic), A: 1; 5
Current metering range, A: 0.01 ÷ 1.5Irat
Maximum value of metered current (Ia, Ib, Ic), A: 7.5
Metering range of zero sequence current 3Io, A: 0.01 ÷ 5
Maximum amperage 3Io, A: 15
Power consumption of current circuits in nominal mode (for each phase), VA, max.: 0.3
Number of voltage metering channels: 3
Rated value of metered alternating voltage (phase/linear), V: 57.7 / 100; 230 / 400
Phase voltage metering range, V: 0.3 ÷ 1.2Urat
Power consumption of voltage circuits in nominal mode (for each phase), VA: 0.1
Verification frequency, years: 10

Signalling channels
Number of channels: 8–40
Discrete input channel input voltage, V: 5 ÷ 220
Maximum input voltage, V: 350
Input impedance, kOhm: 0.5 ÷ 220
Rated value of input currents, mA: 1 ÷ 10

Telecontrol channels
Number of channels: up to 16, depending on the version

Ethernet interfaces
Ports: up to 8
Baud rate, Mbit/s: up to 100
Design variants: RJ-45, LC (single-/multi-mode), SFP
Data exchange protocols: IEC 60870-5-104, IEC 61850-8-1 (option)
Network redundancy protocols: PRP
Clock synchronization protocol: IEC 60870-5-104, PTP

RS-485 interface
Ports: up to 3
Baud rate, bit/s: up to 115 200
RS-485 interface communication protocol: IEC 870-5-101, Modbus RTU

Power supply
Power supply voltage, V - LV version - HV version: 15 ÷ 30; 90 ÷ 264

Design
Case: IP20 plastic
Mounting: DIN rail 35 mm

Reliability
Mean time between failures, h: 140 000 hours
Average lifetime: 30 years

Operating environment
Ambient air temperature, °С: -40 to +70
Relative humidity (non-condensing), %: 5 ÷ 95 at 30 °C
Air pressure, kPa: 60 ÷ 106.7

Description

The RC5-T current control system is designed for continuous monitoring of alternating current in conductors, checking the integrity of the measurement path and generating alert signals in a timely manner when a threshold electric current value is exceeded, or in the event of measurement path failure, as well as for measuring the frequency and phase shift of the currents.


Features

Current measurement channels
Number of channels: 3
Type of current sensor interface port: LC (single-mode fiber)
Max fiber-optic line length, km: up to 5
RMS current, A: up to 1000
Frequency, Hz: 30…3000

Ethernet interface
Baud rate, Mbit/s: 10 / 100
Connector type: RJ-45
Data exchange protocols: IEC 60870-104; SV 61850-9-2 (optional)

RS-485 communication interface
Baud rate, bit/s: up to 115,200
Data exchange protocol: IEC 870-5-101

Power supply
Rated supply voltage, V: 24 (DC)
Operating supply voltage range, V:  9 ÷ 58
Current consumption (at 24 V), mA: 100

Design
Mounting type: DIN rail 35 mm
Case: IP20 plastic
Dimensions (width х height х depth) mm: 22.5 x 99 x 117
Weight, kg: 0,5

Operating conditions and reliability
Operating temperature range, °C: from -60 to +70
Mean time between failures, h: 140000
Average service life, years: 30

Description

RG2-T GSM router is designed to connect industrial network remote segments and automation objects via cellular communication channels supporting GPRS, 3G, LTE. To reserve communication channels, support for two radio modules with SIM cards is used. The wide selection of solutions makes it possible to select an option for specific tasks.

Features

RS-485 and RS-232 communication interfaces
Ports: up to 8 RS-485 ports or 4 RS-232 ports
Baud rate, bit/s: - RS-232 - RS-485: up to 460,000 up to 115,200
Data exchange protocols: IEC 870-5-101, Modbus RTU

Ethernet interfaces
Ports: up to 16, depending on modification
Baud rate, Mbit/s: up to 1000
Design options: RJ-45, LC (single-/multi-mode), SFP
Data exchange protocols: IEC 60870-5-104, IEC 61850-9-2, IEC 61850-8-1 (option)
Network redundancy protocols: PRP, HSR, RSTP
Clock synchronization protocol: NTP, SNTPv4, PTP, PPS

GSM modem
Number of SIM cards: 2
SIM card format: Mini-SIM
Supported data packet transfer standards: GPRS/EDGE/UMTS/HSDPA/HSUPA
Frequency ranges: GSM 900/1800 MHz UMTS 900/2100 MHz
Output power: - UMTS - GSM 900 - GSM 1800 Class 3 (24 dBm + 1.7/-3.7dB) Class 4 (33 dBm ± 2dB) Class 1 (30 dBm ± 2dB)

Versatile discrete input/output channels
Number of channels: up to 4

Power supply
Supply voltage, V: - LV version - HV version 12 ÷ 58; 90 ÷ 264

Design
Case: IP20 plastic
Mounting: DIN rail 35 mm
Weight, kg, max. 1

Reliability
Mean time between failures, h: 140,000 hours
Average lifetime: 30 years

Operating environment
Ambient air temperature, °С: -40 to +70
Average humidity (non-condensing), %: 5 ÷ 95 at 30 °C
Air pressure, kPa: 60 ÷ 106.7